FAX 1140L firmware

[Guest]

hello all,

I have 3 pieces of this machine in my office.

Is any firmware awailable? Because one doesnt copy documents, just sents and prints fax.

Firmware???

Thanks in advance!!

[Masterchief]

Re: FAX 1140L firmware

hello all,

I have 3 pieces of this machine in my office.

Is any firmware awailable? Because one doesnt copy documents, just sents and prints fax.

Firmware???

Thanks in advance!!

Hi these machines are ok TBH, you say it does not copy, i would ask that you are pressing the correct button.
If the machine prints and fax's then it must copy.
i believe that you dont press start to copy its another button and if you look carefully you will see

[Masterchief]

Re: FAX 1140L firmware

IF THIS DOES NOT RESOLVE IT THEN TRY THE FOLLOWING TO RESET THE COPIER
press the following keys:

1. DOWN ARROW, *, #
2.press OK
3.press the #1 key and then OK
4. press stop
5. press the DOWN ARROW, #, then the UP ARROW key( machine will display T-PRINTER ERROR)
6. press OK then reboot

[JustManuals]

Re: FAX 1140L firmware

This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from


Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


Paul@justmanuals.com

[killbill]

Re: FAX 1140L firmware

Hi these machines are ok TBH, you say it does not copy, i would ask that you are pressing the correct button.
If the machine prints and fax's then it must copy.
i believe that you dont press start to copy its another button and if you look carefully you will see

Hey u were right! i was pressing the wrong button!

Can i ask 3 more questions?

1) When i finally made the copy, the black darkness wasnt good enouph. What i can do to increase it? Any setting ?

2) Toner managment setting -without- is it good for the machine? Can toner to be spilled inside cause of this setting?

3)Bios firmware update needed?

[zoraldinho]

manual

You dont need any upgrade.You need user guide.

[femaster]

Re: manual

You dont need any upgrade.You need user guide.

Yup, here you go... You can thank me later...

http://support.ricoh.com/bb_v1oi/pub_e/oi/0001030/0001030601/VH3208651en/H3208651en.pdf

[killbill]

Re: FAX 1140L firmware

Ι had this file, and thank you, the toner magagment "without" setting is not recommended, by the user guide, because it can spil toner inside the machine. Is it true;

And i read all, where is the toner increase darkness setting;

[femaster]

M4Y is going to push everyone out!

SERIOUSLY?!?

What is manuals4you's problem? Does he just like to cause problems and piss people off? Afraid that an owners manual that is FREE from the manufacturer might steal a few undeserved pennies out of your pocket?

I looked, and there is NOTHING is the Forum Rules that prevents me from sharing a free users manual (linked to or not) with my fellow posters. The only thing you are going to do is piss everyone off, so that the only posters left on here are you and end users who don't know anything about service. What good will the site be at that point?

Why in the hell would anybody want to help when your help gets a negative ding every time? Maybe you should see your doctor, I think your meds are screwing up your head...

[killbill]

Re: FAX 1140L firmware

The words u typed, are much more than the words i typed. Also, i didnt mean any of the words u blame me. Where i said u cant share a file? i Said i had it and thank you.

I am not gonna answer you, with the rude words u said, i am gonna keep the conversation clean. You will be judged by admins

Anyone who knows how to increase toner darkness is welcome to help. Anyone who tried toner managment-without- option is will be good for me to know.

[femaster]

Re: FAX 1140L firmware

The words u typed, are much more than the words i typed. Also, i didnt mean any of the words u blame me.

I am not gonna answer you, with the rude words u said, i am gonna keep the conversation clean.

Anyone who knows how to increase toner darkness is welcome to help. Anyone who tried toner managment-without- option is will be good for me to know.

The post was not meant for you. It was meant for the user 'manuals4you', who gave me a negative rating for trying to you help you out by providing you a link to the users manual.

I'm sorry if you misunderstood my posting.

[killbill]

Re: FAX 1140L firmware

He tried to sell a free manual, which is provided by the official site.

He can be banned from this forum easily and the company can sue him if they want, i may email ricoh

[Masterchief]

Re: FAX 1140L firmware

Hey u were right! i was pressing the wrong button!

Can i ask 3 more questions?

1) When i finally made the copy, the black darkness wasnt good enouph. What i can do to increase it? Any setting ?

2) Toner managment setting -without- is it good for the machine? Can toner to be spilled inside cause of this setting?

3)Bios firmware update needed?

The copy density can be found within general settings i think just raise it to full, I would like to ask if the SP cartridge toner has been in the machine long.

Ive used these machines without toner management and never had a problem and you should not need to upgrade the bios firmware

[bejoyjohn]

Re: FAX 1140L firmware

Without toner management means the machine will not inform you about the status of toner like toner low or end of toner