Looking for DF for Kyocera FS-C8520.

[pjdbm]

I had wonderful success using plastic epoxy on the broken hinge base on many M3655idns & DP7110's
I am talking years without any issues.

*Of course, this is for the machines out of warranty and on contract.

[blackcat4866]

It's a couple of hours work, but you'll have a high likelihood of ending up with a working DP. Any used whole DP that you buy will be broken where the left hinge attaches. It's the same DF-470 on the FS-6525, or the FS-8020 or the Alphard KM-2551C, except with charcoal colored covers.

Note: there are a bunch of mylars that you will not get, and are difficult to recover from the old one.

[DougMoney]

Blackcat, do you mean the 303M802015 Base DP?

I wondered if I would be better off replacing the base and transferring everything over.

Thanks!

[blackcat4866]

Make sure that the frame isn't broken out at the left hinge. It happens on all of them eventually.

[DougMoney]

Looking for a working DF from a Kyocera FS-C8520. I believe the FS-6525 is also the same DF.

Thanks,
Doug