video interface kit for C450 Konica

[Buff it out]

Re: video interface kit for C450 Konica

Thanks, The video board apparently would go on several different models

Buff it out

[ddude]

Re: video interface kit for C450 Konica

I will check- the p/ns help, I have various kits but they don't always say what machines they fit.

[Buff it out]

Re: video interface kit for C450 Konica

Actual proper name per konica for this board is a "relay circuit board"&nbsp; with a part<br>number of "40371XCo24HA".&nbsp; There is a data cable from the Fiery to this&nbsp; card<br>which is installed on top of the main circuit board of this copier via an edge connector<br>that is located on the back of the main board and a couple of screws.&nbsp; This VI502kit is <br>a part of the IC402 fiery install kit. <br><br>appreciate your response and if you have one let me know.<br>Buff it out

[Buff it out]

Re: video interface kit for C450 Konica

Actual proper name per konica for this board is a "relay circuit board" with a part
number of "40371XCo24HA". There is a data cable from the Fiery to this card
which is installed on top of the main circuit board of this copier via an edge connector
that is located on the back of the main board and a couple of screws. This VI502kit is
a part of the IC402 fiery install kit.

appreciate your response and if you have one let me know.
Buff it out

[ddude]

Re: video interface kit for C450 Konica

Do you know the item number or part number to these items?

[Buff it out]

Looking to buy video interface kit for C450 used to connect Fiery 402 to
unit also need cable.
Buff it out