Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 26
  1. #11
    Service Manager 5,000+ Posts
    Konia Minolta C452/552/652 NVRAM Reset Tool Firmware

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    7,531
    Rep Power
    182

    Re: Konia Minolta C452/552/652 NVRAM Reset Tool Firmware

    Quote Originally Posted by mtavassoli View Post
    can this be sent to me please. The Firmware for C652 . thanks mtavassoli63@gmail.com
    Why do you need it, do you have a specific fault/issue?


    Let us eat, drink, and be merry, because tomorrow we may die!

    For all your firmware & service manual needs please visit us at:

    www.copierfirmware.co.uk - www.printerfirmware.co.uk




  2. #12
    Junior Member
    Join Date
    Jan 2020
    Location
    tehran
    Posts
    4
    Rep Power
    0

    Re: Konia Minolta C452/552/652 NVRAM Reset Tool Firmware

    Quote Originally Posted by copier tech View Post
    Why do you need it, do you have a specific fault/issue?


    Hi First of All i Can't install this printer via Usb with any Driver and the only Way to Use it is from lan network
    Second, sometimes printer couldn't start and i have to turn off and turn on unit, and i think this Problem because of lack of firmware

  3. #13
    Service Manager 1,000+ Posts
    Join Date
    Sep 2008
    Location
    Flat Rock Michigan
    Posts
    1,046
    Rep Power
    49

    Re: Konia Minolta C452/552/652 NVRAM Reset Tool Firmware

    Quote Originally Posted by mtavassoli View Post
    Hi First of All i Can't install this printer via Usb with any Driver and the only Way to Use it is from lan network
    Second, sometimes printer couldn't start and i have to turn off and turn on unit, and i think this Problem because of lack of firmware


    do you know if it has the usb interface option installed? slide in card on mfp.

  4. #14
    Junior Member
    Join Date
    Jan 2020
    Location
    tehran
    Posts
    4
    Rep Power
    0

    Re: Konia Minolta C452/552/652 NVRAM Reset Tool Firmware

    Quote Originally Posted by Albonline View Post
    do you know if it has the usb interface option installed? slide in card on mfp.
    of course yes , sometimes via usb printer has error on print and it print blank page with error on top and then i install other driver like 3.7 & .... after i change driver the first page is ok but other pages is blank with error so i have to change detection to lan network and in this condition it's good but sometime i have to turn off and turn on to work properly

  5. #15
    Service Manager 1,000+ Posts
    Join Date
    Sep 2008
    Location
    Flat Rock Michigan
    Posts
    1,046
    Rep Power
    49

    Re: Konia Minolta C452/552/652 NVRAM Reset Tool Firmware

    Quote Originally Posted by mtavassoli View Post
    of course yes , sometimes via usb printer has error on print and it print blank page with error on top and then i install other driver like 3.7 & .... after i change driver the first page is ok but other pages is blank with error so i have to change detection to lan network and in this condition it's good but sometime i have to turn off and turn on to work properly

    what your describing usually happens when a bad print job is received. or when the nic is excessively pinged. try running a port monitor on your setup.

  6. #16
    Junior Member
    Join Date
    Jan 2020
    Location
    tehran
    Posts
    4
    Rep Power
    0

    Re: Konia Minolta C452/552/652 NVRAM Reset Tool Firmware

    Quote Originally Posted by Albonline View Post
    what your describing usually happens when a bad print job is received. or when the nic is excessively pinged. try running a port monitor on your setup.
    i install printer to other PC and all of them had same problem and as i said before, first page(test page) is ok and after that it couldn't print properly even test page and printer recieve order but it print blank page with different error code, but we haven't this problem via lan, by the way i have this problem after instal new windows 10 on system and i haven't problem with this device in past.
    so i think wrong driver cause this problem and for cleaning system memory we have to update firmware

  7. #17
    Service Manager 1,000+ Posts
    Join Date
    Sep 2008
    Location
    Flat Rock Michigan
    Posts
    1,046
    Rep Power
    49

    Re: Konia Minolta C452/552/652 NVRAM Reset Tool Firmware

    Quote Originally Posted by mtavassoli View Post
    i install printer to other PC and all of them had same problem and as i said before, first page(test page) is ok and after that it couldn't print properly even test page and printer recieve order but it print blank page with different error code, but we haven't this problem via lan, by the way i have this problem after instal new windows 10 on system and i haven't problem with this device in past.
    so i think wrong driver cause this problem and for cleaning system memory we have to update firmware
    the reset tool will not fix this, nor is it required to update firmware.

  8. #18
    Certified Konica Expert 2,500+ Posts
    Konia Minolta C452/552/652 NVRAM Reset Tool Firmware

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    North Jersey
    Posts
    4,943
    Rep Power
    216

    Re: Konia Minolta C452/552/652 NVRAM Reset Tool Firmware

    Are you making the huge mistake of letting windows install the printer by itself?
    Alway manually install a printer and driver via IP. Never ever use wsd, that's amature hour stuff.
    We know a thing or two because we've seen a thing or two.
    Also don't ask me for files without a contributor badge.

  9. #19
    Field Supervisor 500+ Posts
    Konia Minolta C452/552/652 NVRAM Reset Tool Firmware


    Join Date
    Oct 2010
    Posts
    815
    Rep Power
    45

    Re: Konia Minolta C452/552/652 NVRAM Reset Tool Firmware

    Quote Originally Posted by mtavassoli View Post
    i install printer to other PC and all of them had same problem and as i said before, first page(test page) is ok and after that it couldn't print properly even test page and printer recieve order but it print blank page with different error code, but we haven't this problem via lan, by the way i have this problem after instal new windows 10 on system and i haven't problem with this device in past.
    so i think wrong driver cause this problem and for cleaning system memory we have to update firmware

    So the machine was working fine.


    You changed the computer OS to Windows 10 and a different driver.

    Now you have a print issue and you think clearing the machine memory will fix it?

    Sounds like you need to fix your driver issue on the PC.

  10. #20
    Junior Member
    Join Date
    Nov 2020
    Location
    Timisoara
    Posts
    3
    Rep Power
    0

    Re: Konia Minolta C452/552/652 NVRAM Reset Tool Firmware

    Hello guys. Please, help me. I have a Bizhub C452 machine that I've buyed second hand and I have replaced Image Transfer Belt Unit. I must enter service mode to reset counter, but I don't have the password (doesn't work 92729272, 1...8). I think my last option is to reset NVRAM. Could you help me please wit the reset tool and the last firmware for this machine?

    Thank you very much!

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here