Results 1 to 7 of 7
  1. #1
    Trusted Tech 50+ Posts
    Join Date
    Feb 2020
    Location
    Gaborone
    Posts
    52
    Rep Power
    9

    Ricoh MP2553SP SC554-00 ERROR CODE

    I have this Ricoh MP2553SP that comes up with error code SC554-00. I changed thermistors and heat roller but the problem persist. It does not allow me to access SP mode. I have tried several SP mode access codes still no luck. Once it displays the error code keypad freezes. I want to reset fuser please help.

  2. #2
    Retired 10,000+ Posts
    Ricoh MP2553SP SC554-00 ERROR CODE

    slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    34,132
    Rep Power
    989

    Re: Ricoh MP2553SP SC554-00 ERROR CODE

    Some things to try:
    1. Power the 2553 on with the door open. If it is the code that is keeping you from entering SP mode, that should allow you to get in.
    2. Check that service access is not turned off in User Tools.
    3. If JAVA is installed and set to start up it can inhibit access to SP mode and most User Tools options until JAVA finishes loading. Normally 5 to 10 minutes.
    4. Someone may have changed the SP access code. Try using the old three digit code twice, i.e. abcabc.
    5. Last case scenario is to enter Factory SP and run SP 5810 from there.

  3. #3
    Trusted Tech 50+ Posts
    Join Date
    Feb 2020
    Location
    Gaborone
    Posts
    52
    Rep Power
    9

    Re: Ricoh MP2553SP SC554-00 ERROR CODE

    Quote Originally Posted by slimslob View Post
    Some things to try:
    1. Power the 2553 on with the door open. If it is the code that is keeping you from entering SP mode, that should allow you to get in.
    2. Check that service access is not turned off in User Tools.
    3. If JAVA is installed and set to start up it can inhibit access to SP mode and most User Tools options until JAVA finishes loading. Normally 5 to 10 minutes.
    4. Someone may have changed the SP access code. Try using the old three digit code twice, i.e. abcabc.
    5. Last case scenario is to enter Factory SP and run SP 5810 from there.
    1)Which door are you talking about?
    2) I can see services in user tools. Unless if i m not doing something right. Which code give access to User Tools?
    3) Which old three digital codes ?
    4) How do enter Factory SP

  4. #4
    Service Manager 1,000+ Posts
    Ricoh MP2553SP SC554-00 ERROR CODE


    Join Date
    Nov 2007
    Location
    New Jersey
    Posts
    1,661
    Rep Power
    86

    Re: Ricoh MP2553SP SC554-00 ERROR CODE

    Quote Originally Posted by Khumz View Post
    1)Which door are you talking about?
    2) I can see services in user tools. Unless if i m not doing something right. Which code give access to User Tools?
    3) Which old three digital codes ?
    4) How do enter Factory SP
    I figured that was going to be the case. It's time to call your Ricoh tech, and please don't say that you are the Ricoh tech.

  5. #5
    Retired 10,000+ Posts
    Ricoh MP2553SP SC554-00 ERROR CODE

    slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    34,132
    Rep Power
    989

    Re: Ricoh MP2553SP SC554-00 ERROR CODE

    You are not a qualified Ricoh customer engineer.

    1)Which door are you talking about?
    Any of the doors on the main frame.

    2) I can see services in user tools. Unless if i m not doing something right. Which code give access to User Tools?
    The User Tools button.

    3) Which old three digital codes ?
    If you were a qualified Ricoh customer engineer you would know.

    4) How do enter Factory SP
    If you were a qualified Ricoh customer engineer you would know.

  6. #6
    Trusted Tech 50+ Posts
    Join Date
    Feb 2020
    Location
    Gaborone
    Posts
    52
    Rep Power
    9

    Re: Ricoh MP2553SP SC554-00 ERROR CODE

    [QUOTE=slimslob;1317701]You are not a qualified Ricoh customer engineer.



    Any of the doors on the main frame.



    The User Tools button.



    If you were a qualified Ricoh customer engineer you would know.

    Slimslob............

    Actually i had done most of all these technics without success so i thought i m get it wrong some how that is why i wanted more clarification. Anywhere thanks though i managed to figure out where i was getting it wrong. Yes i m not Ricoh guy but i have done quite a lot Ricoh machines. Thank you all.

  7. #7
    Copier Technician 1,000+ Posts
    Ricoh MP2553SP SC554-00 ERROR CODE

    mga's Avatar
    Join Date
    Dec 2010
    Location
    london
    Posts
    1,393
    Rep Power
    135

    Re: Ricoh MP2553SP SC554-00 ERROR CODE

    [QUOTE=Khumz;1317760]
    Quote Originally Posted by slimslob View Post
    You are not a qualified Ricoh customer engineer.



    Any of the doors on the main frame.



    The User Tools button.



    If you were a qualified Ricoh customer engineer you would know.

    Slimslob............

    Actually i had done most of all these technics without success so i thought i m get it wrong some how that is why i wanted more clarification. Anywhere thanks though i managed to figure out where i was getting it wrong. Yes i m not Ricoh guy but i have done quite a lot Ricoh machines. Thank you all.
    Best to call a ricoh Service engineer he would have this done in no time
    Regards Mark

    FOR TRADE AND END USER SERVICE CALLS PLEASE VISIT WEB SITE FOR CONTACT DETAILS. COVERING GREATER LONDON {UK} AND ALL SURROUNDING COUNTIES.

    RICOH, CANON, KYOCERA, KONICA, SHARP, HP/SAMSUNG BROTHER, LEXMARK.

    https://copierservices.simdif.com

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here