Hope this helps
Hope this helps
Great finally they noticed the fix for the paper feed units. Will probably get more than 150K out of the rollers.
Even it this means a different pickup, feed and separation roller.
Sure this will work on older models too.
Whatever
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Thanks for the information
Yes, finally some good improvements. Wonder how much these new rollers are going to cost, $20 - $30 each? Lol
Speaking of rollers, I've had good results with using aftermarket from Copylite & Katun, Use the ribbed & red feed from copylite and the katun red feed for sep. The copylite red has same tacky feel as OEM the katun isn't as tacky so better for sep. Been getting at least 100k with this combination. I found if you use same red (oem or generic) for feed & sep they wear in less than 50k
i thought we always had different rollers. to be honest i only use the a00j563600 red ones but do recall back in the day use to be asked to use the blue ones for longer life.
Regards Mark
FOR TRADE AND END USER SERVICE CALLS PLEASE VISIT WEB SITE FOR CONTACT DETAILS. COVERING GREATER LONDON {UK} AND ALL SURROUNDING COUNTIES.
RICOH, CANON, KYOCERA, KONICA, SHARP, HP/SAMSUNG BROTHER, LEXMARK.
https://copierservices.simdif.com
Any part number of new rollers?
Bookmarks