hi
I was messing with a mpc401sr FW all updated and when trying to reduce legal to letter via ADF it cuts off at the trail edge..1.5 to 2 inches even if i go to 25%
in reduction..Am i missing something????????????lead edge and reg is all good
hi
I was messing with a mpc401sr FW all updated and when trying to reduce legal to letter via ADF it cuts off at the trail edge..1.5 to 2 inches even if i go to 25%
in reduction..Am i missing something????????????lead edge and reg is all good
Can't remember on this model, but it might be that you have to set the ADF to recognize the legal size paper.
Don't think they have sensors that determine length of paper.
Omertà
maybe i have to tell machine mixxed originals.
but i hit legal to letter on reduction mode
so i had time to muck thru the machine..
to make legal to letter reduction you have to hit original type
and tell it legal and then choose letter tray and hit the reduction 78% and it works..
always assumed that machine did auto paper detect thru adf..
“I think you should treat good friends like a fine wine. That’s why I keep mine locked up in the basement.” - Tim Hawkins
Bookmarks