Mpc 2003 not able to load web browser

[Stephendupey]

I have a client who has a mpc 2003 with a static IP, and when I try log into the web browser it gives 404 not found. Is there anything specific that could be causing that?

This client also has a Mac laptop that he prints from, is there any way for them to be able to print in colour from the laptop without postscript?

[slimslob]

Newer model Mac with latest OS X have been able to print in color for about 4 years. Just no way to tell it not to do so. If the document has color it will print. Also no way to enter User Code.

[sandmanmac]

I have a client who has a mpc 2003 with a static IP, and when I try log into the web browser it gives 404 not found. Is there anything specific that could be causing that?

This client also has a Mac laptop that he prints from, is there any way for them to be able to print in colour from the laptop without postscript?

This sounds like a new setup to me.
Can you confirm if the WIM was working for the client, and then just suddenly stopped, or you have no idea if it was working prior to your installation?

[Phil B.]

I have a client who has a mpc 2003 with a static IP, and when I try log into the web browser it gives 404 not found. Is there anything specific that could be causing that?

This client also has a Mac laptop that he prints from, is there any way for them to be able to print in colour from the laptop without postscript?

can you post the network config page from SMC report.. sounds like setup was not done correctly to me.

what print driver are they using?

is it configed to B&W only?

[slimslob]

Did someone try to setup a self signed Device Certificate. If so WIM will require that you access it as https and will give a 404 not found if you try to access as http device.

[bsm2]

Check the security settings

[Stephendupey]

This sounds like a new setup to me.
Can you confirm if the WIM was working for the client, and then just suddenly stopped, or you have no idea if it was working prior to your installation?

I'm not sure if it was working before, the machine had been on site for a while, I was at the client for quality issues, but I wanted to set up @remote at the same time, which is when I discovered that I couldn't get on the web browser

[Stephendupey]

Is HTTP diabled? If so, you can switch it on using telnet.

How do you do that?

[slimslob]

Is HTTP diabled? If so, you can switch it on using telnet.

First check SP 5895-001. It should be set to 1. If set to 2 WIM could be disabled.

[Stephendupey]

First check SP 5895-001. It should be set to 1. If set to 2 WIM could be disabled.

OK, I'll do that