Results 1 to 7 of 7

Thread: Need Firmware

  1. #1
    Trusted Tech 50+ Posts
    Join Date
    Nov 2020
    Location
    Anuradhapura
    Posts
    65
    Rep Power
    0

    Post Need Firmware

    I have a Toshiba e-Studio 2050c Copier. Please give a link for the firmware that copier. (MJD version, HDD model)

  2. #2
    Senior Tech 100+ Posts
    Need Firmware

    aalex_bom's Avatar
    Join Date
    Jan 2008
    Location
    Mel
    Posts
    215
    Rep Power
    0

    Re: Need Firmware

    check PM, please

  3. #3
    Junior Member
    Join Date
    Dec 2020
    Location
    Esch
    Posts
    2
    Rep Power
    0

    Re: Need Firmware

    Hello alex, can you send me too?

  4. #4
    Senior Tech 100+ Posts
    Need Firmware

    aalex_bom's Avatar
    Join Date
    Jan 2008
    Location
    Mel
    Posts
    215
    Rep Power
    0

    Re: Need Firmware

    Quote Originally Posted by rorom333 View Post
    Hello alex, can you send me too?
    check PM, please.

  5. #5
    Junior Member
    Join Date
    May 2021
    Location
    Lahore
    Posts
    4
    Rep Power
    0

    Re: Need Firmware

    Quote Originally Posted by aalex_bom View Post
    check PM, please.
    Yes I have Firmware Toahiba copiers.
    e studio
    3508A
    2050c
    4520c
    357
    352
    282
    for sale.

    contact my email ID.
    alishair1452@gmail.com

  6. #6
    Junior Member
    Join Date
    May 2021
    Location
    Lahore
    Posts
    4
    Rep Power
    0

    Re: Need Firmware

    Quote Originally Posted by MacTavishLK View Post
    I have a Toshiba e-Studio 2050c Copier. Please give a link for the firmware that copier. (MJD version, HDD model)
    Contact My Email.

    alishair1452@gmail.com
    whatsapp
    +923224868144

  7. #7
    Junior Member
    Join Date
    Sep 2022
    Location
    London
    Posts
    1
    Rep Power
    0

    Smile Re: Need Firmware

    Quote Originally Posted by Copiertech 1452 View Post
    Contact My Email.

    alishair1452@gmail.com
    whatsapp
    +923224868144
    I just wanted to add that I was in a fix as I had factory reset a Toshiba e-Studio 2330C and this effectively bricked it! I am really annoyed at Toshiba for A) not warning you that doing this will brick your device and B) making it literally impossible for you to recover! I tried contacting Toshiba and our local service agent and they wouldn't help at all! So out of desperation I contacted the number above in WhatsApp and in the end reluctantly sent some money to the chap that answered in the hope it would work out well. And I have to say, it really did No sooner had I sent the payment than I received the firmware and beyond that, the chap was really, really helpful in getting it installed and working.

    I struggled to find a USB drive that would work, as most of the ones I had were 4GB or upwards and the printer flatly refused to recognise them (it was made at a time when a 512MB USB drive was considered huge)! I tried FAT\FAT32, smaller partitions etc. but to no avail. In the end I found a USB SD card reader with a 16GB SD card and it booted from that where the others had failed?! So for anyone else in this situation; find the oldest USB thumb drive you can get, ideally 1GB or less, so you know it is old enough to be recognised by the printer, and use that.

    And beyond that, the process of installing the firmware is as nasty and messy as you could imagine in your worst nightmare. You had to enter hidden menus by powering on with at least three different combinations of holding different keys down to get to different 'hidden' menus. You then had to key in several different combinations of numbers to access hidden functions in the hidden menus. Shame on you Toshiba for making something so, so bad!!!

    But, fortunately for me, alishair1452, who I had just paid some money to for the firmware, helped me through the process with great patience.

    I should add, I have factory reset hundreds of devices, maybe thousands. I have flashed firmware to BIOS's in the 90's, routers in the 00's and phones in the 10's. But in three decades working in IT, I have never had the palaver I had with this c**ppy Toshiba!

    Anyway, my point is, the amount I paid alishair1452 for the firmware I do begrudge paying. But for the help that came with it, it was worth it and it worked out well in the end

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here