Page 2 of 2 FirstFirst 12
Results 11 to 14 of 14
  1. #11
    service technician 50+ Posts
    Join Date
    Feb 2018
    Location
    Kankakee, ill
    Posts
    51
    Rep Power
    13

    Re: Konica Bizhub 600 Network Not Working To Pc

    looks like the right unit, try what emujo said in his post. if it will not pull a ip address by dhcp the board maybe bad or the board it connects too may be bad. i believe you need a x-over cable for laptop or try a standard 4 port switch to create a mini network.

  2. #12
    Retired 10,000+ Posts
    Konica Bizhub 600 Network Not Working To Pc

    slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    34,128
    Rep Power
    989

    Re: Konica Bizhub 600 Network Not Working To Pc

    Quote Originally Posted by emujo2 View Post
    After watching the video again...This is a pretty old machine..If the network card is configured to auto negotiate, it may never connect to a 1gb port.try setting the port to 100 full duplex. If this is a DHCP environment try restarting in DHCP and see if you can pull an address. Another thing would be to go into Admin and turn OFF TCP/IP , cycle power, then turn TCP/IP on. this is like a NIC reset. Also..someone refresh me..did the 600 need a x-over to connect directly back to a laptop? E
    Quote Originally Posted by K-3 View Post
    looks like the right unit, try what emujo said in his post. if it will not pull a ip address by dhcp the board maybe bad or the board it connects too may be bad. i believe you need a x-over cable for laptop or try a standard 4 port switch to create a mini network.
    If the laptop is new enough then a crossover cable is not needed. The laptop I bought in 2005 required one on older models. Every one I have used after that one did not.

  3. #13
    Service Manager 1,000+ Posts
    Join Date
    Mar 2017
    Posts
    1,568
    Rep Power
    73

    Re: Konica Bizhub 600 Network Not Working To Pc

    It's not the laptop..older NICs could not directly connect back to another nic w/o going through a switch or hub. This is only a problem connecting directly to a printer from your laptop via ethernet. E

  4. #14
    Certified Konica Expert 2,500+ Posts
    Konica Bizhub 600 Network Not Working To Pc

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    North Jersey
    Posts
    4,943
    Rep Power
    216

    Re: Konica Bizhub 600 Network Not Working To Pc

    Autocrossover is on the (newer) PC side, the nic on the copier is irrelevant.
    We know a thing or two because we've seen a thing or two.
    Also don't ask me for files without a contributor badge.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here