have a good day all of you
I want to ask a question
How did you like the MP 501?
I appreciate your opinion because we are about to say if we buy these teams.
thank you very much
have a good day all of you
I want to ask a question
How did you like the MP 501?
I appreciate your opinion because we are about to say if we buy these teams.
thank you very much
If it works, don't touch it.
Truth. Not my favorite. The consumables are very difficult to change (Fuser, pcu, dev unit) and they do not last anywhere near their rated life. And the controller board requires a contortionist to remove when it fails as it's a Ricoh part shoe horned into the Kyocera frame.
Sent from my LM-V405 using Tapatalk
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
is a good machine, i have 30 MP501 and give me good resault.
Late to the party on this one.
In short, I am not a fan. You can read on if you want to see specifics.
Fusers do not reach yield at all. Not even close in most cases.
PCU's are not a lot better.
Machine overall is noisy and a lot of times, that noise is either from the PCU or the fuser. The good news is the machine has a "silent mode" that drops the speed and the noise. Over half my machines are in silent mode.
Pray you never have to change a right rail because the paper won't lift. It isn't fun at all.
Bookmarks