Reboot Olivetti d-Color MF282plus

[copier tech]

Hello occus, thank you for your reply.

in germany we are having logistical problems due to bad weather and the parts are arriving late. I have ordered a new SSD which is yet to arrive
For now I have taken a used SSD to make it stop rebooting. But I have seen that the solution is not effective. The printer keeps restarting anyway.
Firmware is also unknown. I wanted to try a Konica Minolta firmware because there seems to be no Olivetti firmware on Knova.

You need to fit a NEW SSD.

[Bix]

Hi, good news.
The SSD used was not working but I received the new SSD (identical for Konica Minolta 4e series).

Now it works again!
Thank you all for the support.
Special thanks also to @occus!

By the way (it has nothing to do with the problem). For those interested: Konica Minolta toners and drums cannot be inserted on this olivetti 282+. it is necessary to make some modifications to the plastics.

[copier tech]

Hi, good news.
The SSD used was not working but I received the new SSD (identical for Konica Minolta 4e series).

Now it works again!
Thank you all for the support.
Special thanks also to @occus!

By the way (it has nothing to do with the problem). For those interested: Konica Minolta toners and drums cannot be inserted on this olivetti 282+. it is necessary to make some modifications to the plastics.

I told you to fit a NEW SSD!

[Bix]

Yes, I also said a few posts ago.

I have ordered a new SSDB.

But the weather was bad in Germany, transport slowed down.So in the meantime I had inserted an SSD used to understand if it stopped restarting. But this technique doesn't work.

[copier tech]

Yes, I also said a few posts ago.

But the weather was bad in Germany, transport slowed down.So in the meantime I had inserted an SSD used to understand if it stopped restarting. But this technique doesn't work.

No, as I said you can't fit a used SSD for this issue.

[Bix]

No, as I said you can't fit a used SSD for this issue.

I was hoping it would stop rebooting and return an error with used SSD.
I keep learning from mistakes. Thank you.

[copier tech]

I was hoping it would stop rebooting and return an error with used SSD.
I keep learning from mistakes. Thank you.

Always worth trying used parts but to be honest in my experience you have a much higher success rate fitting brand new parts & often fitting used boards you create more issues.