Hi everyone,
Just out of curiosity, has anyone ever used an alternative feed roller for the bypass? (as unofficial mod) to see if it improves the paper feed.
Sent from my VTR-L09 using Tapatalk
Hi everyone,
Just out of curiosity, has anyone ever used an alternative feed roller for the bypass? (as unofficial mod) to see if it improves the paper feed.
Sent from my VTR-L09 using Tapatalk
I happen to replace the rubber rollers of the drawers or the bypass with other brands but only if very similar and in any case then in the long run they gave problems, much better the originals, however I noticed that the pickups with toothed tread take better any type of paper
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Some glossy and other special paper stock tend to have lots of paper dust on them. Cleaning regularly is my only advise.
Whatever
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Cleaning does help but only for about a week. Might just be the paper it doesn't like tbh.
Sent from my VTR-L09 using Tapatalk
Bookmarks