Dislikes: 0
I have a web motor running continuously, since i switch on the machine.
Harness has been checked and it is not grounded somewhere, so i think
it is the BICU failed. Does anyone came across this failure?
By the way, i would like to ask where are the Schematics, part of Service
Manual located? I am having access to My Ricoh site but i cannot find it, nowhere!!
Thans in advance for any help...
The Schematic is located in the Point to Point diagram.
Oh!!! This is obvious!!Originally Posted by anothertech
Should i have to change my question : Where is P2P diagram located...??
the point to point will give you connection information between boards and major components. If you want schematics for the boards you will need to become an authorized board repair facility.
I didn't ask for boards wiring diagram!!!
"I have a web motor running continuously, since i switch on the machine.
Harness has been checked and it is not grounded somewhere, so i think
it is the BICU failed. Does anyone came across this failure?"
This is the first part!!!
You asked for schematics. That means board level wiring. The Point to Point is a separate document. RFG E-source number in the US is 039081. Check the PSG for your region to see if they list the order number for your area. Try on the last page. If you cannot find a source, put a request in the Service Manual Request Forum.
that too is located in the service manual
maybe you didn't state your needs clearly enough.
Separate manual.
Thanks: 
Likes: 
Reply With Quote
Bookmarks