When print ink come out

[mikadonovan]

It kinda looks like something may be wrong with the K PDCU. Print a color pattern in printer SP mode. If the problem resides with just the black, that is the issue.

[mga]

I already replace new fuser film
Setting pressure roller to 800 in sp 1151
Last what i do is install new driver it is XPS test print ok not all print it come like that some of file only.

There's your problem did you just fit film or complete sleeve assy

[zaidi911]

There's your problem did you just fit film or complete sleeve assy

I completely assambly all part. And just change fuser film only not all part

[zaidi911]

It kinda looks like something may be wrong with the K PDCU. Print a color pattern in printer SP mode. If the problem resides with just the black, that is the issue.

Color pattern when i print it ok no problem ink proper stick in paper but when i print that excel file it become ink non stick in paper just that file another file i print ok no problem.

[Phil B.]

I completely assambly all part. And just change fuser film only not all part

don't understand did you rebuild the whole fuser? thermostats-thernistors-bearings-pressure roller or just replace film? those other parts SHOULD be replaced also.. if NO then there's your problem.

[zaidi911]

don't understand did you rebuild the whole fuser? thermostats-thernistors-bearings-pressure roller or just replace film? those other parts SHOULD be replaced also.. if NO then there's your problem.

Im just replace film, and will try the another part after this. I tq

[Phil B.]

Im just replace film, and will try the another part after this. I tq

NEVER half ass a rebuild on a fuser.

did you use an aftermarket film? another half ass move.

[BillyCarpenter]

NEVER half ass a rebuild on a fuser.

did you use an aftermarket film? another half ass move.

When I first saw the image it looked like a fuser problem to me. I agree with Phil, if you're gonna rebuild a fuser, don't half-ass it or it'll come back to bite you in the ass.

[mga]

NEVER half ass a rebuild on a fuser.

did you use an aftermarket film? another half ass move.

Waste of time fitting cheap China parts that's way you can't buy from ricoh always fit complete sleeve

[Phil B.]

Waste of time fitting cheap China parts that's way you can't buy from ricoh always fit complete sleeve

China parts, just like the country they come from are CRAP.


i am having a hard time believing anything the OP tells us.. a 10year tech fumbling with such a simple problem amazes me.

i'd hate to see his recall rate.