If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Took a system board from a junk machine. The password is on there. If anybody else runs in to the same thing, you need the system pcb. No replaceable SRAM.
So....Bare with me its been Monday for 3 days now.
IF Service password and Admin password are Unknown then it will require a sys board swap. Guessing you can't fix the key mis-match and need to reformat HDD
However IF at least one of the passwords are known, then there are ways to reset the other per the instructions in the service and or user documentation.
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
There are a removable ic in system board
"R45V200A"
Change it
H + S mode >password keep blank >enter >reload firmware
It will be ok
Bookmarks