Originally Posted by
ABS tect
Ok so some progress has been made, and it is slowly moving to a different issue which I am not sure is under the category of this forum, but rather a computer issue.
So the question of can it do it, is yes. I did what slimslob suggested and put the cardstock in tray 3, and it printed correctly, even with a thick 2 setting, saddle stitch with a cover page out of tray 3 and the rest out of tray 2 on plain.
The new issue, which is most likely an entire new topic, is I could only get it to print from Word and off of a PC. Issue is the customer needs to print as a PDF and from a Mac. When I print from a Mac, in the print properties everything holds and looks correct but as soon as the machine receives it the machine resets the job as if it didn’t like the settings.
The print settings are different in a Mac then a PC obviously but can’t seem to figure this out and have drove myself mad. Any help is appreciated, thanks again slimslob for the advice, and I understand if I just need to mess around some more with drivers and settings as it appears to be a computer issue now.
thanks
Bookmarks