Thanks: 
Likes: I have a machine Ricoh mpc 4502. When I make copy it will sow some line in backside on paper . I change transfer roller and ITB and fuser but no luck .
Dislikes: 0
I have a machine Ricoh mpc 4502. When I make copy it will sow some line in backside on paper . I change transfer roller and ITB and fuser but no luck .
IF they aren't running duplex jobs check paper path and fuser.Originally Posted by muhammadreza
No duplex job only single side copy or print
That mark appears to be right where one of the thermistors contacts the pressure.
Slim he changed fuser.
OP what are PM counts?
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
he didn't say if it was NEW or a pull from another machine... I agree about the thermistor mark
for that matter he didn't mention if ANY of the parts were new or used.
Agree yes he didn't. I would presume he put used parts so there's a margin of second fuser having same problem...
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
[QUOTE=Phil B.;1771168]he didn't say if it was NEW or a pull from another machine... I agree about the thermistor mark
for that matter he didn't mention if ANY of the parts were new or used.[/QUOTE fuser change with other machine
i pull fuser from another machine but other machine working fine with this fuser
when I make copy I try to stop before fuser and i saw Same problem
Reply With Quote
Bookmarks