Canon iPF670 printhead error

[gl.iliev77]

Hello everyone, i have Canon iPF670 and i have a color problem. at Print Quality: Fast 300dpi - the yellow color is missing in stripes; at Print Quality: Standart 600dpi - the yellow color is completely absent; at Print Quality: High 600dpi - everything is OK. Where is the problem and can it be fixed? I have ink in all cartridges about 80%. 3 times clean with "type А" and 2 times - "type B" and there is no result. But this morning I released one nozzle check pattern and then the plotter died and wanted to replace the printhead.
https://scontent.fsof5-1.fna.fbcdn.n...dc&oe=60C6C1CD
https://scontent.fsof5-1.fna.fbcdn.n...89&oe=60C6F83A
https://scontent.fsof5-1.fna.fbcdn.n...a9&oe=60C76E39
https://scontent.fsof5-1.fna.fbcdn.n...84&oe=60C6FBE7

If you change the head, will it be okay or do you have a problem with the motherboard??

[Phil B.]

Hello everyone, i have Canon iPF670 and i have a color problem. at Print Quality: Fast 300dpi - the yellow color is missing in stripes; at Print Quality: Standart 600dpi - the yellow color is completely absent; at Print Quality: High 600dpi - everything is OK. Where is the problem and can it be fixed? I have ink in all cartridges about 80%. 3 times clean with "type А" and 2 times - "type B" and there is no result. But this morning I released one nozzle check pattern and then the plotter died and wanted to replace the printhead.
https://scontent.fsof5-1.fna.fbcdn.n...dc&oe=60C6C1CD
https://scontent.fsof5-1.fna.fbcdn.n...89&oe=60C6F83A
https://scontent.fsof5-1.fna.fbcdn.n...a9&oe=60C76E39
https://scontent.fsof5-1.fna.fbcdn.n...84&oe=60C6FBE7

If you change the head, will it be okay or do you have a problem with the motherboard??

if they leave the machine sitting for a week.. that will cause PH to become clogged

if they are using 'turd party ' ink THAT is the main cause

[gl.iliev77]

I only use original ink!

[Phil B.]

I only use original ink!

ok that answers ONE question what about the other one?

here's another to ponder ..

is there heat or air conditioning blowing down on the machine?

[blackcat4866]

The printhead should solve your issue. Like Phil suggests, you should print a minimum of one Arch D page every week to keep the printhead clear. =^..^=

[gl.iliev77]

ok that answers ONE question what about the other one?

here's another to ponder ..

is there heat or air conditioning blowing down on the machine?

In the afternoon the sun burns it, I will have to open the blinds. Before this happened, I had not used it for 2 to 3 weeks. Тoday I will order a new head ​and will hopefully be fine.

[Phil B.]

In the afternoon the sun burns it, I will have to open the blinds. Before this happened, I had not used it for 2 to 3 weeks. Тoday I will order a new head ​and will hopefully be fine.

You need to move it to a location that it doesn't get direct sunlight... the sun will heat it up therefore drying out the print head faster. Ink based units are not like laser based units


Sent from my SM-G960U using Tapatalk

[gl.iliev77]

Thank you, I was worried about buying a new head and having another problem, but these days I plan to order a new one. (sorry for the bad English)

[gl.iliev77]

Hello again, I recently decided to start the plotter and this message appeared:
Shared album - Георги Илиев - Google Photos
Shared album - Георги Илиев - Google Photos

[Phil B.]

Hello again, I recently decided to start the plotter and this message appeared:
Shared album - Георги Илиев - Google Photos
Shared album - Георги Илиев - Google Photos

ok it's loading ink