Well now that I am Lexmark tech (it says Sharp on the front) I do not know how to get into the diagnostics of these machines. Any help would be appreciated.
Well now that I am Lexmark tech (it says Sharp on the front) I do not know how to get into the diagnostics of these machines. Any help would be appreciated.
Do you have access to manuals? What models are you working on? =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Diagnostic Menu: *, *, 3, 6 from Ready Status, or Hold buttons 3 & 6 from Power Up.
Safe Mode: Hold Buttons 6 & 7 from Power Up (allows use of device even with an error condition).
Invalid Engine Code: Hold Buttons 3, 4 & 6 from Power Up (allows access printer webpage to perform update of firmware).
Lexmark codes have been the same for many years. Works on the Sharps too.
Does anyone know if you can change the shortcuts of the first screen. in the lexmark it is possible, but in the sharp it is not possible
Thank you
You can make selection of what icons appear during the initial setup wizard. If you want to make different selections you must re-run the initial setup wizard. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
I say the home screen where it appears easy copy, easy scan, easy fax
I can't modify
a come out
Bookmarks