Thanks: 
Likes: 
Dislikes: Please help me sort error F9-10
Please help me sort error F9-10
F9-10 will be a communication error between the MCU and the Printer PWB. Can parts even be gotten for this model? I doubt it. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
So should I change the boards?
Which boards did you have in mind?Originally Posted by Yadstiks
I think the Printer PWB is the most likely. The MCU would be my second choice.
Did you say replacement boards are available? =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
release date of 2003.I doubt it. maybe Hytec?
Try reseating your boards and connectors. Also disconnect network cable and reboot copier. Do the second one first.
Might be time to upgrade to a AR-M257
Reply With Quote
Bookmarks