my printer konica minolta bizhub 501 is not working due to error c2801, pls help and give me solutation
my printer konica minolta bizhub 501 is not working due to error c2801, pls help and give me solutation
C-2801 TCR output abnormality.When the TCR output is inexcess of 3.0 V.
... you're not a technician, are you?
If you have to ask what TCR sensor adjust is, you should be calling a technician. You'll just make it worse, if that is at all possible.
=^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Call a Konica Minolta service tech
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from
Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads
Paul@justmanuals.com
If you don't have a working knowledge about copier theory, a manual will only get you into a lot of trouble and cost as you will have to call a tech to fix the original problem plus the problems you create by attempting to fix it yourself. CALL A TECH!!!!!!
Check starter and drum maybe is time to change them
A professional technician would know that you never run TCR sensor adjust with used and very probably degraded developer. Before you make it worse, please, please, please, get some professional help. You can't do this by yourself. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Bookmarks