I have a problem with a konica minolta C452.
As you can see in attached examples, the beginning of prints are lighters.
I check belt, transfer roller, and laser, but i cant solve the problem.
Any idea?
I have a problem with a konica minolta C452.
As you can see in attached examples, the beginning of prints are lighters.
I check belt, transfer roller, and laser, but i cant solve the problem.
Any idea?
Those prints are ran thru in portrait direction? Did you do a stop test?
There is an adjustment for 2nd transfer lead edge I believe.
Play with those numbers and see what changes.
have you tried cleaning your second transfer roller ?
Strange,had this on a couple of these and what synthohol suggested rectified the problem.
Did you adjust it correctly?
Also did you do a panic stop to see if it happens on 1st or 2nd transfer?
I don't like the new copier I just bought. It says "put face down" but every time I do it, it blinds my eyes.
sometimes just to see if it is an electrical issue, try setting it to thick 1,2 or 3 to see if the problem changes. if yes then its likely electrical, if no change it might be something mechanical. check the contact point on the copier where the transfer roller gets its juice and the terminal spring that touches it.
Bookmarks