Konica Minolta Ineo 223 Fax card Error C-B003 \ C-B116

[Don N.]

I have an Ineo / BH363 with the same problem. Changed the fax card already and did all as advised but problem persists. Anyone wanting to share with me that "special" firmware for B116 codes please? I have no access as an Indy.

touchpanel[at]rex-technika.com

Hans

The latest Special FW 223 283 363 423 A1UD0Y0-F000-GDC-D6.exe says "A fax receiving error R07 occurs from Ricoh product due to unnecessary V.21 Signal."
Doesn't sound like your problem?
If someone will tell me what fw to download, I will be happy to share it. We use main FW G00-D6 on all machines in the field.

[Gino_21665]

Hi all, just an update on the issue

By having an error on another machine i figured out what the cause is :

When in tech rep mode you have the Fax card as "SET" but the card isn't physically in the machine or its set to Line 2 and does not detect.
The machine when booting looks for the installed card when it does not detect it or if the card is faulty and does not detect its presence this causes the "Startup Error Please Reboot" if you unset the card that isn't there then error clears.

Regards
Gino

I have an Ineo / BH363 with the same problem. Changed the fax card already and did all as advised but problem persists. Anyone wanting to share with me that "special" firmware for B116 codes please? I have no access as an Indy.

touchpanel[at]rex-technika.com

Hans