Good day.
You can send me the SST and the firmware on the imageRUNNER ADVANCE C5235i
sludge17@icloud.com
Good day.
You can send me the SST and the firmware on the imageRUNNER ADVANCE C5235i
sludge17@icloud.com
Hello,
I searched forums, but couldn't possibly find firmware for iR2520, would appreciate if anyone can send me a link to download last firmware, user support tool and service support tool.
email: fitisov1990@gmail.com
Thanks in advance.
Not sure if anyone is responding to all these requests but I'll put mine in anyway... Totally confused by all the drivers on the Canon site for this machine - sheesh, do you have to be an engineer just to use a copier or printer these days?
Anyway, I'm chasing the SST & firmware for the IR C2880 PUH LEESE and Thank you.
fleabay@y7mail.com
Hi,
Can anybody help me I searched forums, but couldn't possibly find a Canon IR 3045 SST, and tell me what is the process to setup a new HARD DISK. The existing one is broken and needs to be replaced. I dont't have any spare available in the country and need to do it myself.
Thanks in advance my email icpinter999@gmail.com
================================================== ===============================
1. u need toi buy a Canon OEM HDD -------WM2-5230-000
2. u need the 3045 v33.03.01 firmware
3. u need to install Canon SST program on PC/Laptop.
4. u then need to download & then register iR3045 v33.03.01 firmware into SST
5. u then connect PC/Laptop to printer (w/crossover cable)----power on the iR with 2 & 8 keys on the control panel pressed until "Download mode" is indicated onthe LCD display. This will boot the iR with a fixed IP address of 172.16.1.100 and subnet mask of 255.255.255.0
Now give your laptop/PC an IP address of 172.16.1.10 with subnet mask of 255.255.255.0
How do you connect your Laptop to the copier.jpg
6. open SST> search in it's menu for iR3045 firmware
7. select SINGLE in middle menu to format HDD
8. then u can run START ASSIST to finish firmware download
The HDD must be formatted while inside the printer by using the iR3045's SST Registered Firmware > HDFormat file.
On the newer model machines, you must connect to the device in 'Single Mode' to format the HDD with the HDFormat file.
After format> u then install the complete 3045 sst registered firmware.
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Please, renew the link.
Or send me an email with the SST
comercialspam@gmail.com
Thanks
Dear Sirs,
I really need some help... I've got a Canon IR2230 and the hard disk is dead. I did purchased a new hard disk but I need the Service Support Tool + Firmware in order to fix it. If somebody could help me I really appreciate it. My e-mail is: icilegumix@yahoo.com
Thanks a bunch
C'mon people, really ? Nobody is helping me with a Canon iR2230 firmware+sst ? Pretty please
It's a matter of life and death !
icilegumix@yahoo.com
please help! I have cannon ir2520. display messages insert drum.
please send me firmware and cannon support user tool.
tokamela1993@gmail.com
Thanks all !!!!
Bookmarks