Page 1 of 2 12 LastLast
Results 1 to 10 of 17
  1. #1
    Technician
    Join Date
    May 2019
    Location
    brooklyn
    Posts
    12
    Rep Power
    10

    xerox versant 80 error 099-339

    hi all,
    having this error 099-339 Fuser Belt in Limit Fail i moved it back to position and it keeps on happening again mainly when i use 20lb paper i tried a new fuser but the problem continued, would anyone be able to specify why this is happening and what the solution? tnx much
    levy

  2. #2
    Service Manager 10,000+ Posts
    xerox versant 80 error 099-339

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    22,659
    Rep Power
    658

    Re: xerox versant 80 error 099-339

    Quote Originally Posted by levyk View Post
    hi all,
    having this error 099-339 Fuser Belt in Limit Fail i moved it back to position and it keeps on happening again mainly when i use 20lb paper i tried a new fuser but the problem continued, would anyone be able to specify why this is happening and what the solution? tnx much
    levy
    not sure .. but are there "nip" adjustment screws on that fuser? if so did you follow the procedure in the manual

  3. #3
    Technician
    Join Date
    May 2019
    Location
    brooklyn
    Posts
    12
    Rep Power
    10

    Re: xerox versant 80 error 099-339

    Quote Originally Posted by Phil B. View Post
    not sure .. but are there "nip" adjustment screws on that fuser? if so did you follow the procedure in the manual
    i dont really know where the nip screw is located will look into that, ill advise if anything changes

    tnx phil

  4. #4
    Service Manager 1,000+ Posts
    xerox versant 80 error 099-339

    adriansto's Avatar
    Join Date
    Nov 2007
    Location
    Somewhere in Europe near Black Sea
    Posts
    2,237
    Rep Power
    71

    Re: xerox versant 80 error 099-339

    There are a lot of possible causes for this error ( gears, sensors, etc ) but noting to do with fuser nip adjustments.
    You need service manual and follow the proper procedure from there.
    Last edited by adriansto; 08-28-2019 at 08:24 AM.

  5. #5
    Service Manager 10,000+ Posts
    xerox versant 80 error 099-339

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    22,659
    Rep Power
    658

    Re: xerox versant 80 error 099-339

    Quote Originally Posted by adriansto View Post
    There are a lot of possible causes for this error ( Ggars, sensors, etc ) but noting to do with fuser nip adjustments.
    You need service manual and follow the proper procedure from there.
    Well to be honest, I did say I wasn't sure on this model. But thanks for correcting me.


    Sent from my SM-G960U using Tapatalk

  6. #6
    Technician
    Join Date
    May 2019
    Location
    brooklyn
    Posts
    12
    Rep Power
    10

    Re: xerox versant 80 error 099-339

    Quote Originally Posted by adriansto View Post
    There are a lot of possible causes for this error ( gears, sensors, etc ) but noting to do with fuser nip adjustments.
    You need service manual and follow the proper procedure from there.
    hi tnx for your reply, in the service Manuel it just says "Fuser Belt Assembly is out of position. Reseat the assembly and make sure the Belt Edge Sensor is in contact with thebelt edge" so i keep doing this and it keeps on happening again, trying to figure out the cause and how to solve (am i looking at the wrong manual?)

    tnx

  7. #7
    Service Manager 1,000+ Posts
    xerox versant 80 error 099-339

    adriansto's Avatar
    Join Date
    Nov 2007
    Location
    Somewhere in Europe near Black Sea
    Posts
    2,237
    Rep Power
    71

    Re: xerox versant 80 error 099-339

    There are more.
    Pdf service manual 705P01362 & edoc 705P01379

  8. #8
    Technician
    Join Date
    May 2019
    Location
    brooklyn
    Posts
    12
    Rep Power
    10

    Re: xerox versant 80 error 099-339

    Quote Originally Posted by adriansto View Post
    There are more.
    Pdf service manual 705P01362 & edoc 705P01379
    where can i get this manual?

    tnx

  9. #9
    Service Manager 1,000+ Posts
    xerox versant 80 error 099-339

    adriansto's Avatar
    Join Date
    Nov 2007
    Location
    Somewhere in Europe near Black Sea
    Posts
    2,237
    Rep Power
    71

    Re: xerox versant 80 error 099-339

    Quote Originally Posted by levyk View Post
    where can i get this manual?

    tnx
    stoadis@gmail.com

  10. #10
    Technician Dech's Avatar
    Join Date
    Aug 2014
    Location
    Brisbane
    Posts
    48
    Rep Power
    0

    Re: xerox versant 80 error 099-339

    try this

    see attachment
    Attached Images Attached Images

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here