How to reset the counter meter by canon iRxxx E-CODE E350 ,E355

[ninja copy]

Serial EEPROM available
Universal Device Programmer

meter 0.jpg
1.counter pcb
2.Serial pcbManage with superpro-580u-programmer

You have to copy
1.counter pcb
2.Serial pcb
From another device with Manage with superpro-xxxu-programmer

From another device Read, keep and save to E355
E355 on IR ADV 6075

1.service mode * 1 7 + 3 9 * FACTORYmode 2.select 01 [ ALL RAM CLEAR ]
3.select E35* CLEAR & ALL RAM CLEAR [-] 4.select KeyPad NUM 2
5.select OK 6.Wait for the system to reset the system. And up to E355 and turn off the machine
7.Assemble COUNTER,SERIAL 8.Turn the device into the normal screen


binary file download for test

How to reset the counter meter 0000000 copier , counter check ~ Copier repair Insurance

[alex@wocltd.com]

what are you doing to read and program eco board? and what chipset?

and why not just do fram init on counter board? also no mention of how to clear e355 - gonna suggest srv mode lv3?

[Phil B.]

Serial EEPROM available
Universal Device Programmer

meter 0.jpg
1.counter pcb
2.Serial pcbManage with superpro-580u-programmer

You have to copy
1.counter pcb
2.Serial pcb
From another device with Manage with superpro-xxxu-programmer
From another device Read, keep and save to E355
E355 on IR ADV 6075
1.service mode * 1 7 + 3 9 * FACTORYmode 2.select 01 [ ALL RAM CLEAR ]
3.select E35* CLEAR & ALL RAM CLEAR [-] 4.select KeyPad NUM 2
5.select OK 6.Wait for the system to reset the system. And up to E355 and turn off the machine
7.Assemble COUNTER,SERIAL 8.Turn the device into the normal screen
binary file download for test
How to reset the counter meter 0000000 copier , counter check ~ Copier repair Insurance

so you are using this device to turn back ALL counters including main total counter?

what is the purpose, other than to run a scam saying it's a new machine?

IN FACT in America that is a Crime... it's called FRAUD and if that is the intent of this post.. you could lose your account here.. and frankly I would support Admin's move on that whole heartedly.