Can you get to the web page through a crossover cable with the laptop in the copier's current IP range?
If so, you can make changes there, reboot and then change settings.
Can you get to the web page through a crossover cable with the laptop in the copier's current IP range?
If so, you can make changes there, reboot and then change settings.
"You can't trust your eyes, if your mind is out of focus" --
I doubt anyone who knew what they were doing set the machine to 192.168.1.1. Change your laptop IP to 192.168.1.2. Run a network cable between laptop and copier.
Change IP address
Download and run Advanced IP scanner
Run the IP scanner on the range 192.168.1.1-254
Scan the range, you should get two live replies, one from your laptop and one from the machine.
Browse to the IP of the machine while still connected and make needed changes.
Thank you for all your help! it turns out that I had made a mistake with the IP octet the prior visits. It was on a 192.168.1.10.111 as opposed to my 192.168.1.1.111. It took a second look at it today and discovered my over site. Once I made connection with the mfp I was able to get into the service web page and make the changes Spanky and Mansart had suggested.
Bookmarks