Page 1 of 2 12 LastLast
Results 1 to 10 of 12
  1. #1
    Service Manager 1,000+ Posts digicor's Avatar
    Join Date
    Jul 2008
    Location
    tampa Florida
    Posts
    1,127
    Rep Power
    45

    MP7502 LCT not finishing the supply

    THe LCT Drawer on this 7502 has stopped running the peper all the way out, it starts jamming at about a quarter inch left to go, we refill it, then it runs no problems, is there an adjustment? thats come loose, or a sensor?
    i cant seem to find any adjustment,, ive benn working on these type of machines for a long time, this is the first ive had one not go to empty
    thanks

  2. #2
    Ricoh Fanboy 1,000+ Posts Oze's Avatar
    Join Date
    Jul 2008
    Location
    Toowoomba,QLD
    Posts
    1,662
    Rep Power
    63

    Re: MP7502 LCT not finishing the supply

    Is the plate lifting evenly?
    Check the cables at the front and the rear that lift the cables...I've had them where one side lifts at different height to the other and makes the plate slightly crooked.

  3. #3
    Trusted Tech 50+ Posts
    Join Date
    Mar 2018
    Location
    Boston
    Posts
    79
    Rep Power
    13

    Re: MP7502 LCT not finishing the supply

    Rollers?


    Sent from my iPhone using Tapatalk

  4. #4
    Senior Tech 100+ Posts
    Join Date
    Jul 2015
    Posts
    178
    Rep Power
    21

    Re: MP7502 LCT not finishing the supply

    What is the jam code?

  5. #5
    Service Manager 1,000+ Posts digicor's Avatar
    Join Date
    Jul 2008
    Location
    tampa Florida
    Posts
    1,127
    Rep Power
    45

    Re: MP7502 LCT not finishing the supply

    Quote Originally Posted by djs9164 View Post
    Rollers?



    Sent from my iPhone using Tapatalk
    pick up feed tires are new and the clutch as well....thanks you

  6. #6
    Senior Tech 2,500+ Posts
    MP7502 LCT not finishing the supply

    mikadonovan's Avatar
    Join Date
    May 2008
    Location
    Indianapolis, Indiana
    Posts
    2,920
    Rep Power
    99

    Re: MP7502 LCT not finishing the supply

    Quote Originally Posted by digicor View Post
    pick up feed tires are new and the clutch as well....thanks you
    Might want to change the paper feed and sep rollers as well.
    NEVER ASSUME ANYTHING

  7. #7
    Service Manager 1,000+ Posts digicor's Avatar
    Join Date
    Jul 2008
    Location
    tampa Florida
    Posts
    1,127
    Rep Power
    45

    Re: MP7502 LCT not finishing the supply

    all feed tires, sep roller are new, ive even replaced the pick up mechanism with a very new one, im having the clien keep an eye on the tray to see if its not level when this occurs again,

  8. #8
    Trusted Tech 50+ Posts
    Join Date
    Mar 2018
    Location
    Boston
    Posts
    79
    Rep Power
    13

    Re: MP7502 LCT not finishing the supply

    Try swapping feed units for a test.


    Sent from my iPhone using Tapatalk

  9. #9
    Senior Tech 100+ Posts
    Join Date
    Jul 2015
    Posts
    178
    Rep Power
    21

    Re: MP7502 LCT not finishing the supply

    AGAIN
    What is the jam code?

  10. #10
    Service Manager 1,000+ Posts digicor's Avatar
    Join Date
    Jul 2008
    Location
    tampa Florida
    Posts
    1,127
    Rep Power
    45

    Re: MP7502 LCT not finishing the supply

    Quote Originally Posted by MIKON View Post
    AGAIN
    What is the jam code?
    Sorry, I'm not sure where to find that, I looked in sc7504, but it's just a total, please tell me where those are located, it's not in the sc section where the other codes are listed , such as " latest"
    1,2,3,4 etc...

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here