Thanks:
0
Dislikes:
0
-
Technician
- Rep Power
- 22
Sharp Copier Sims
Just looking at all the Sharp simulations and I use a lot of them for troubleshooting problems like sim 1-2, 2-2, 3-2, 7-1, along with the ones that clear the codes. Also I use 22-40 and 41 for the list of codes and errors. So what codes do you seem to use the most? Just a question for the input of others.
-
Re: Sharp Copier Sims
Refer to the installation manual during setup, and after service/pm. I've been retired 3.5 years, but I remember that adjusting print/copy position, you would use the sims in the 50-sub range. For print/copy quality, use the 46-sub range.
"You can't trust your eyes, if your mind is out of focus" --
-
Re: Sharp Copier Sims
Most often used 22-6, 24-1 and 64-1,5 if no calibration needed or error codes need to be reset.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks