Activity Stream

Thanks a lot!!!

Had plenty of trouble with compatible toner. In all the cases I had the machine always over toned. Have not seen it causing depleted developer.

When i run a clear all from CE it returns NG. Then i reboot it and i get an error that the HDD need to format. After it is formated it is back to...

I sent my colleague to check it yesterday and apparently the second paper holder wasn't set in place correctly which seem to have been a cause for...

check the contact spring dv dk-mc for me

i would never buy the new STS when i can get the older style on ebay for 1/3 of the price. Have one at home/shop/warehouse.... they run forever,...

What is the exact issue you have with scanning? SMB or email ?

Thanks for your reply. You are right, the problem was low quality toner, that was damaged develop. Thanks for your advices, have a nice days :)

.-

224e 3 lamp heaters c224e 2 lamps so different conector rest is same

Yup I solved it by replaced print head unit. Thank you all for advice.

They can't. It's what whiners do

I tried to install fuser of C284e to 284e but the connectors are not the same.

Most likely your developing unit is dead due to not using OEM toner. We have encounter similar issue from user using aftermarket toner causing dotted...

Replaced the RSDF driver PCB and that took care of the problem ( I tried replacing the DF input sensor but that did not resolve the problem)

They are the same fuser. I have interchanged them many times. Yes the 224e B&W is what I upgrade the 223 series with. Still have customers with...

... global oil prices set new record again! I am paying over $8.00 US per gallon! Stop whining!