Activity Stream

Back in the day, here in Kern County LA branch salesmen would show up in their 3 piece dark suits and the local farming community would basically b...

Very interesting since your profile says New York.

Can anybody help with the problem?

ever heard of what a enabler is? if someone went out of their way to search for an answer, got no hits. come here, look for help given the...

Maybe Phil B should read the manual .......... :cool:

Then check the gates/plates that divert the paper. Selinoids could come into play. Sent from my SM-G960U using Tapatalk

Good Job brother! Sent from my SM-G960U using Tapatalk

He/She is just BFU (butt fucking ugly) but it fits into the agenda. SnifferJoe claims he has the first gay male on staff (Betaboi-TX) HE forgot...

Had this same issue on an x02 series set trays to auto. Bit bizarre not yet resolved with a firmware fix.

This falls into the GND agenda. They sit in washington and have no flipping about real life pitfalls. UNLESS they buy me a Tesla..my own charging...

Call Xerox support in your country.

Never heard of initialisation for polygon motor, are you sure you are thinking of correct brand/model.

Are they trying to give each user their own profiles? Different paper trays/paper for certain jobs? Are they storing them on the server? Are you...

2.5" SATA 320GB, however as you know you can pretty much use any size within reason.

Back in the day (late 80's early 90's) it was a suit & tie. Now I simply wear smart shoes, suit trousers & plain shirt. (no tie) However...

As harsh as this reply is, this will be your best bet rather than wait for a reply, especially if you are in a different time zone.

He posted he is using the service USB slot & he has access to the service manual so I would assume so.

Yea it would be unprofessional. But the most professional companies could not do a 2 hour response time including from 7 to 7, 7 days a week. They...

Phil I don't see anything in the manual about initializing the polygon, what page did you see that on?

Or if you are an end user any colour fits in any hole apparently!

The only feed tray pots that I ever had to adjust were on RN's (or RP's maybe) back in the day new out of the box. Maybe there is a paperclip or...

When using the Canon Remote Operation View, the item for changing the job storage time in protected printing is displayed in grey without the...

And where to purchase it? I am from the UK, you can navigate here. Please tell me what postal service to choose to have a reasonable delivery price...

Yes sir, you are correct..no Web browser firmware for this..my mistake. E

Sorry but cant find it in SM. I only read it that Automatic Adjustment of drum should be made after replace LD unit. If you can explain me will be a...

this isn't something you want to stumble into blindly... you have been told to Read The Fucking Manual ... best advice you could heed.

Did you check what copier tech adviced? You will also eventually need to actually read this service manual because it's going a bit complicated if...

Thanks to all. Could you direct me as to how activate the manual toner supply? I know on the Ricohs but not sure on KMs. I know how to get into...

Mattel vertibird, I had the one with the rescue ship Wheelo, Electric Trains, Super Helmet 7, Strange Change monster maker oven I had a...

I don't mind lending advice... but I refuse to do your homework for you. you claim to be a tech... show ME you are .