Activity Stream

Yeahhhh you're doomed. You'll need to find an MXTU16 exit unit or an MXFN27N finisher and install it. We bought a few finishers from an equipment...

My employer has mentioned to me that the exit cabinets are impossible to get. We have had several trade-ins but they all had the inner finishers.

Judge Rules Election Results Void After Illegal Votes Are Discovered Sent from my SM-G990U using Tapatalk

Welcome Sent from my SM-G990U using Tapatalk

I'm seeing the same issue here at the school district with the new Accurioprint 2100's. Secure print just doesn't work. It works just fine on all our...

This is one of the most despicable things I've ever heard. Our colleges have been taken over by left wing loons. In sworn testimony before...

You could try this. Problem CE pasword/Service mode locked Solution CAUSE:To many failed attempts entering CE password ...

Just adding into this thread. We replaced the HV board and the issue still persisted. Following the electrical diagram, all voltage and image...

One must use a Kyocera KX driver for this to work. At the KX print driver, choose Printer Properties > 'Device Settings' tab >...

Yes, it was working quite well. Enviado do meu SM-A207F através do Tapatalk

I've been with a computer since childhood, I'm not even ready to say, I've never been limited

I think you should reconsider your criteria for living in your city