Activity Stream

Try a reload first, but HDD are low cost items so I would have no hesitation in just replacing and doing a software reload on the fiery anyway. ...

Also, check do you have trace of pick up roller on paper which is jamed.

Is it just the dev blade getting bunged up that does it? Yeah any settings you have its worth a shot on the next one seen 3 machines like this so far...

Thank you, gentlemen, for your help. I will update the firmware only with the .fwu files in romdata on the SD card. I will let you know the...

Make sure all mounting options are purchased. I had one case like this and sales guy missed one mandatory oltion.

if this is the case i suspect ever job should jam regardless of punch enabled or not

My experience is that even though Ricoh says with newer models you can put more than one model on an SD card it is not recommended. The more product...

The Panasonic SD Card Format Utility is no longer available from Panasonic. Their website will redirect you SDcard.org. As I am retired and no longer...

The drill motors may have a problem lifting up again

1) Format the SD CARD. 2) place the romdata folder with .FWU folders in it and place it in the sd card slot in the device. 3) If there are updated...

so punch in copy mode is enabled but not on driver? id focus on getting it not jamming in copy mode first before worrying about the fact its not...

Anyof the trouble codes C6102/6751/9401. Itis caused by the loose screw at the timing belt pulley.Ifthe screw was loosened, the pulley is idling...

Holy c.ap! You replaced more than all required and it still won't work. Any options added, try without them.

You need more help ? Then give us more information ! How old are the parts, 22-6 ?? More information give you more answers

Welcome

Try reformat the card with a tool called panasonic sd card formatter (google it) and give it another shot. And yes, you just put the fwu into the...