Activity Stream

nothing, at this point you should try to replace the entire fuser unit with one of a machine that you know works, it could be the plastic guides that...

hello Bix, I am currently on a customers site and installing a c458, when I enable the web browser it’s asking me to enter a license code?? Any...

I use 250 grit or 400 grit emory cloth, don't use anything larger than 250 or it will damage the grid. Been doing it for years and it works great. ...

Changed entire exit unit... But customer still report random jams... Inviato dal mio SM-G935F utilizzando Tapatalk

You could have just gone to HP's support page https://www.support.hp.com/us-en

Might be worth trying to capture the print port and see what happens. Don't use WSD though, it is dog shit technology, typical MS! Capturing...

Refreshing this topic because...: I have bizhub c308, and i updated firmware to version GC2-W4, and after that update i cannot login even as...

Hi, remove the finisher/job separator and try to rewrite the firmware without. To reset the finisher/job separator, update it individually or update...

The grinding noise is back again, and after more research it seems this error is often caused by a sticking solenoid, and it seems to be on the fuser...

You can find the firmware here

https://photocopyvn.com/firmware-may-photocopy/

True, true, so true................... but i managed to find that program and reset the sc code so the machine is fine now. Thank you all for your...