Activity Stream

Carriage PCA changed? Sounds like it's either bad, or the flex cables were not connected correctly, or were damaged. I'd still try one more new...

See if the price can move a bit. Kick ass machine! Ex-lease equipment is the way to go. I picked up this HP Z1 for $500! Its an absolute joy. ...

it's SnifferJoe's plan to tank OUR economy this and his hatred of oil and it's by products

That's true. You're about to talk me into buying this server. ;)

This makes my blood boil. What are we doing? They send us rapists and murderers (some are fine folks) and we send them $4 billion large.

2100$ is more like the price of single gaming PC not a server. These come at a price for a reason you know.

Model#: UCS-EZ8-C240M4-V MSRP: $17,360.00

Can you initialize the machine? What's the Firmware level?

Are Kyo rep suggested putting silent mode ON to extend the life of the fusers .

If the image looks perfect on the primary transfer belt, I'd be looking at the secondary transfer roller (or whatever your machine uses.) Check the...

You should be able to a used Server for less than half of a new one.:cool:

we need the following info: is this a brand new machine or a 'refurb' what is the count on the developer page count is it dirty inside ...

The circle on top is another screw but photo is dark. Problem has been fixed. Thank you,

My parts manual just shows individual parts as well. We've got several junk machines to scavenge stuff like an entire feed section from if we would...

I'll admit that I'm addicted. However, this won't be for only a learning tool. I'm tapped out on storage space on my PC and my backup drive is full....

Ok try adjustments and finger the laser.

If its only going to be a tool for learning and home use you don't need expensive hardware. Then again this seems to be something you enjoy more...