Activity Stream

FBI interviewed priest, choir director in rogue probe of Catholic church's link to terrorism - Washington Times Sent from my SM-G990U using...

https://www.wsj.com/articles/higher-ed-has-become-a-threat-to-america-antisemitism-dei-college-f52bb0b5 Sent from my SM-G990U using Tapatalk

yes it is a bit annoying to get there 1. Controller box 2. PSU 3. Fusing motor 4. Paper transport motor 5. HVPS (PCDU) 6. ITB 7. Paper...

Have you tried ACM? ACM Technologies, Inc.: Home

Glad to have you join us.

https://www.westernjournal.com/soros-open-societies-foundation-announces-50-million-push-just-time-2024-election/?utm_source=Email&utm_medium=CTBreaki...

If you are printing stickers and labels, be sure to set the paper type to the proper setting at the machine and in the print drivers. If you are...

Thanks for update JC. Interestin first time I hear about that board may being defective.

Is there an easy wat to get the paper feed clutch out? It looks like it is behind the PSU and you basically have to remove everything to get to it.

Bot's are getting smarter, and smarter. Jesus.

"Sky Shots" "DV Check" disable? Your Sharp Tech is leaking. ;)

I used this video today to clear out a jam caused by a staple in the e2555c Doc feeder using thick paper. Jamming in the Document Feeder ...

My history: MX-3070N U5-20 Error: Removed foreign media in ADF assy, 250 page test... no jams! MX-3070N U5-20 Error: Paper stuck inside ADF...

Looks good, functional and it works. We just keep a set it stock, and we have been using inner finishers. But sometimes we use it when an inner...

I really hate Sharp for doing this. Also, you might want to add in what the finished result is supposed to look like... Not everyone enjoys Lego's,...

I believe your only option is though the control panel and reset maintenance kit/ drum count, etc.

One of our techs actually wrote some scripts for essentially making print drivers with all of the settings and such. It's a little confusing to me,...

Psst, you, yeah you, come here... here you looking for some TU16's... Listen my guy... there is a way... but it costs.... 3 times the price ok?...

Jam 000 23 what does it mean-- finisher df770 , taskalfa 3051ci

Yea that's what I figured, I did see someone mentioning taking motor assembly out of a BP kit, not sure what they were talking about. I'm a Toshiba...

You sure it's U6? After replacing the DSPF PWB it's very common to get an E6-11 code, for shading, where you have to use a calibration chart(which...