PDA

View Full Version : Does a BZ 350 printhead work on a BZ 200?


Custom Search


fixthecopier
06-10-2015, 04:59 PM
I think I have done this swap before, but can't remember for sure. I have a 200 with a printhead that is screaming, and my only BZ parts machine with a head still in it is a 350. I don't want to go through the pain of calling tech support to ask and don't want to instal it and it not work. Thanks.

hotfuser
06-10-2015, 05:15 PM
I think I have done this swap before, but can't remember for sure. I have a 200 with a printhead that is screaming, and my only BZ parts machine with a head still in it is a 350. I don't want to go through the pain of calling tech support to ask and don't want to instal it and it not work. Thanks.

i dont think the 350 fits as the 250 and 200 are the same.

but i would give it a go as the faster PH may work in a slower machine and not vice versa.

fixthecopier
06-10-2015, 05:53 PM
i dont think the 350 fits as the 250 and 200 are the same.

but i would give it a go as the faster PH may work in a slower machine and not vice versa.

That's exactly what I as thinking.

fixthecopier
06-10-2015, 09:02 PM
Yep,it worked fine.

jerogers2004
06-14-2015, 03:22 PM
The Bizhub 350's print head is different than the one used in the Bizhub 250/200

Part Numbers
4040075100 P/H ASSY Bizhub 350
4041075100 P/H ASSY Bizhub 250/200

Hansoon
06-15-2015, 04:36 PM
If the Polygon Mirror is noisy, just replace the rotating mirror from any BH-200,250,350 machine. They are all the same. Only the electronics are different. No need for the whole unit. Most of the time the mirrors loose the counterbalance weights which are blobs of glue.

Hans

Custom Search