PDA

View Full Version : Miscellaneous konica minolta c203 faded copies


Custom Search


rajat
06-11-2015, 11:13 AM
hello everyone, i have konica minolta c203 when i print it, it comes out good but when i make a copy of it, its fading,
i didnt try anything, i know a bit about the functions of the copier, if anybody could suggest me it will be highly appreciated

Dickie
06-11-2015, 11:23 AM
Clean the optics then run all gradations.

But remember it's a copier ! If you copy originals the result will never be quite as good as can be seen by copying copies then copying resulting copy eventually the copies become very poor compared to the original

rajat
06-11-2015, 11:37 AM
thanks dickie, ill will do as suggested

rajat
07-01-2015, 12:09 PM
Hello everyone, I have konica minolta c203, i am trying to reset fuser but due to some reason i cannot do it,
i have cut the two blue wires from the bottom of the fuser and solder it with the fuse, when i turn on the machine, it still show me the same result,
it is displaying the message to change the fuser.
if anybody can help it will be highly appreciated

Custom Search