View Full Version : Bizhub C220 black image problem low image density
Hello.
Problem: low toner density
When: Copying and printing, but only sometimes.
Sometimes when printing or copying the page is almost blank, but in 30 copies for example appear one or 2 in the middle like that, the rest is ok.
Yesterday in almost 100 copies only happen to me in 3 sheets.
Someone already have the same problem?
hotfuser
06-11-2015, 04:19 PM
Hello.
Problem: low toner density
When: Copying and printing, but only sometimes.
Sometimes when printing or copying the page is almost blank, but in 30 copies for example appear one or 2 in the middle like that, the rest is ok.
Yesterday in almost 100 copies only happen to me in 3 sheets.
Someone already have the same problem?
Black dev drive clutch connector cable has snapped internally and making contact intermitently.
change the black dev drive clutch part number A0ED M200 00
CompyTech
06-11-2015, 04:21 PM
Hello.
Problem: low toner density
When: Copying and printing, but only sometimes.
Sometimes when printing or copying the page is almost blank, but in 30 copies for example appear one or 2 in the middle like that, the rest is ok.
Yesterday in almost 100 copies only happen to me in 3 sheets.
Someone already have the same problem?
I would make sure the machine is using OEM toner, and any components are not at EOL. Run stabilizer a few times and gradation adjustment.
Black dev drive clutch connector cable has snapped internally and making contact intermitently.
change the black dev drive clutch part number A0ED M200 00
I think that was the problem. Thanks..
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.