View Full Version : C224 not seeing adf
Brett GS
06-12-2015, 06:40 PM
Hi guys
I got a c224 that isnt seeing the adf,it was working fine yesterday.
In service mode the adf tab isnt showing as well as in the firmware tab there isnt any firmware showing for the adf.
Im going back to the machine on monday.
Any suggestions?
Brett
emujo
06-12-2015, 09:46 PM
System 2, 2nd page ADF settings. Choose either the 624 or 701(dual pass). Emujo
Brett GS
06-15-2015, 02:59 PM
System 2, 2nd page ADF settings. Choose either the 624 or 701(dual pass). Emujo
Thanks Emujo it worked
AjitN
06-16-2015, 05:55 PM
well done
But question is why it got disable in NVM when it was working OK
Obliviously some other settings are also got changed.
Pls check all settings OR reload firmware OR check electrical supply (typically earthing & voltages).
Just suggestion
Ajit
emujo
06-16-2015, 11:18 PM
well done
But question is why it got disable in NVM when it was working OK
Obliviously some other settings are also got changed.
Pls check all settings OR reload firmware OR check electrical supply (typically earthing & voltages).
Just suggestion
Ajit
What are you talking about!!!! It's working, bag it and tag it...LOL
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.