View Full Version : Error Code minolta di470 code 0090
garrycmsi
06-18-2015, 04:17 PM
developer motor wont always start i can get it to spin by manually turning it. is it a bad motor? or is it like some kyoceras that give motor error codes when interlock switches fail
Hansoon
06-18-2015, 05:05 PM
We had a lot of these machines in the past and never ever a single C-0090 service code. Only thing I can imagine is an obstruction in the developing unit/drive. Did you check if the mag roller is turning freely? Occasionally we had the inner bearings go bad.
Hans
garrycmsi
06-18-2015, 07:57 PM
thank you hans,
developer unit turns freely, motor will turn every so often and makes a buzzing sound when it decides to turn
Hansoon
06-19-2015, 10:18 AM
Garry, when those stepper motors make a buzzing/whining sound it is most of the time some kind of overload.
Hans
laitang
06-19-2015, 11:23 AM
From SM:
29519
Developing Unit Drive Motor (M1) part no: 9314-2200-11
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.