PDA

View Full Version : Jamming bizhub 600 jams in ADF WHEN DOING 2-SIDED accomanied with a noise j6202


Custom Search


fearless
06-21-2015, 05:43 PM
Hello Everybody

has anybody dealt or seen this issue?

blackcat4866
06-22-2015, 12:58 AM
Maybe 66-02? I think you would have discovered that there is no 62-02 in the manual. =^..^=

allan
06-22-2015, 03:21 AM
I had that on a B601 it drove me mad. found that the paper would seem to jam into a gate on its way back to the glass just before the second scan. I remember the code and the noise like a belt jumping.
It drove me mad, i changed the DF board with the same result then the entire DF with the same result. Also did firmware.
To get it running i had to file away a part of the gate.

fearless
06-22-2015, 02:17 PM
Thank you guys...there is actually a jam code for ADF ON P.412 ON SERVICE MANUAL . is it the turn over guide or the paper guide ,that is sitting on Slit glass?

Thanks a whole bunch

allan
06-22-2015, 04:11 PM
In my case the first gate after switchback.

fearless
06-23-2015, 02:16 AM
Thank you Allan.

i will try that.

Custom Search