View Full Version : CQ Konica Minolta Bizhub 420 Background
mearmi
06-24-2015, 10:20 AM
Hi
Got Bizhub 420, background on the copy/print when do duplex
Single side copies/prints are fine.
Replaced Drum Developer and Transfer corona assembly.
Please advise
Thanks and Kind Regards,
Mearmi
kingarthur
06-24-2015, 11:29 AM
have you played around with the voltages, from memory raising the transfer voltage helped....obviously make a note of all voltages before you start
mearmi
06-24-2015, 11:40 AM
have you played around with the voltages, from memory raising the transfer voltage helped....obviously make a note of all voltages before you start
Thanks for your reply.
No I didn't. Shall I increase the voltage? Or any default value?
thanks
mearmi
06-28-2015, 04:54 AM
have you played around with the voltages, from memory raising the transfer voltage helped....obviously make a note of all voltages before you start
By increasing the transfer voltage, the problem is gone.
thanks a lot for your help
Kind Regards
Mearmi
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.