PDA

View Full Version : KMK c450 fuser unit or gear?


Custom Search


Richards
07-02-2015, 01:42 PM
I replaced one fusing unit. The stripping fingers had dug into the fusing roller. It was close to its life; so I replaced it with a 'used fuser' (bad idea). This one worked for a while, but now the stripper fingers are digging in on this fuser roller as well.
I am going to get a brand new fuser unit, but before I install I wanted to see if anyone knew if it could be something else - maybe a worn gear. Any ideas? Thanks

Custom Search