PDA

View Full Version : C3110 no start the Display, Panel and scanner no function.


Custom Search


freixi
07-02-2015, 06:42 PM
hi Guys

I have a bizhub C3110 and in turned one I see on the screen only the pixels (no backlight)and the controll pannel get no answer, scaner also does not come on. After repeatedly off and on she goes complet again. In turn, the man listens componenten normal as ever, only the upper part does not turn on, no lamps.
what can I do?

last Firmware Update not results.

Best regards

Freixi

hmp
09-16-2015, 06:29 AM
Hi Freixi
How did you go with this?
We are having the same issue as we speak and the Tech had escalated this to Konica.
They tried the firmware and then also a format of the SSD. Konica have advised to replace the SSD board.
cheers

freixi
09-16-2015, 09:39 AM
Hi,The post I had already forgotten.
I changed to guarantee this part.


Replace PWB PN: A6DTH01004

problem is solved :)

The SSDB is the complet board (PWB+PRCB) ??? no can see in the Parts Manual.
change PRCB= not solved
change PWB= solved

Many thx

Freixi30634

jwai
05-15-2019, 10:50 AM
So, you finally solved this issue by replaced the MFPB of SSDB?

jwai
05-15-2019, 10:58 AM
Hi,The post I had already forgotten.
I changed to guarantee this part.


Replace PWB PN: A6DTH01004

problem is solved :)

The SSDB is the complet board (PWB+PRCB) ??? no can see in the Parts Manual.
change PRCB= not solved
change PWB= solved

Many thx

Freixi30634

#5 on the manual is the part number of SSDB.

Custom Search