View Full Version : Toner addition methods?
allan
07-03-2015, 05:02 PM
How does a machine know when to add tonner?
There seems to be a couple of ways.
Anybody care to explain how RICOH machines adds toner.
I have learned about Vsg and Vsp and Vt. What conditions must be met to add toner?
cristian
07-03-2015, 07:36 PM
The increase in the toner add rate will decrease the amount added, and lowering the number will increase the amount of toneradded. This is a little "glitch" Ricoh has used with their machines for years, where the number is reversed from what you'd expect it to be.
blackcat4866
07-03-2015, 11:47 PM
The increase in the toner add rate will decrease the amount added, and lowering the number will increase the amount of toneradded. This is a little "glitch" Ricoh has used with their machines for years, where the number is reversed from what you'd expect it to be.
I always wondered about that. Thank cristian. =^..^=
allan
07-04-2015, 06:46 AM
So then it must be true. I thought it was just me.
What does fixed mode mean?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.