PDA

View Full Version : 224e dead display.


Custom Search


Paul Ridds
07-09-2015, 06:48 PM
Have a dead display on 224e.Motors and drives running but no display. Changed power supply and mfpb.Still no luck.Any suggestions greatly appreciated.

Sent from my SM-N910F using Tapatalk

copier tech
07-09-2015, 07:25 PM
Does the machine print & copy even though you cant see the screen is the start key blue etc?

It could be a simply failed screen, I would try removing & refitting all the panel connections

Paul Ridds
07-09-2015, 07:46 PM
Screen ok as tried on another machine. No light or display at all.

Sent from my SM-N910F using Tapatalk

Albonline
07-09-2015, 08:13 PM
then you are down to the connections on the wiring harness.

EarthKmTech
07-10-2015, 12:40 AM
when the ram is fried you will get no signs of life from the panel.

did you install new ram with the MFP board ?

I've had defective mfp boards destroy ram too, 3 brand new sticks 24 hours apart from each other till mfp was replaced, so replacing it was probably the right thing to do.

Paul Ridds
07-10-2015, 08:01 AM
Thanks for all your replies guys.Will let you all know the outcome when I get to the bottom of it.

Sent from my SM-N910F using Tapatalk

Paul Ridds
07-10-2015, 06:28 PM
Update gents.Turned out to be cable between display and the MFPB.Thanks for the feedback,really helpful.

Sent from my SM-N910F using Tapatalk

copier tech
07-10-2015, 06:31 PM
Good fix! Was it a loose cable or did you replace it?

Paul Ridds
07-10-2015, 06:46 PM
Had to replace it,obviously a break in the wiring somewhere. Machine has only been in the client 2 months from new.Pesky Japanese /China assembly line.

Sent from my SM-N910F using Tapatalk

EarthKmTech
07-10-2015, 10:14 PM
good to know.

Now that I think of it, I beleive another tech at my company had this problem too.

Must be the same discount cable supplier that was making the DF-701 cis data cables :cool:

Custom Search