Konica Minolta C253 2 Green Lines

[mearmi]

Konica Minolta C253, Getting 2 Green Vertical Lines on Print/Image and on half tones as well

Did Gradation, Stabilization but problem still exists.

Please find the attached sample image.

Thanks and Regards,

Mearmi

[Blizzoo]

How are halftones tests?

[mearmi]

How are halftones tests?

There is line as well

[copier addict]

I would say you magenta IU has a void area in that spot. Try cleaning the printhead.
If that doesn't fix it you can try disassembling the IU and fixing it that way.
Otherwise replace it.
Hope this helps.

[allan]

I have made a special tool to clean the laser glass on these machines those swabs only push the dirt around.
Take a blower brush and attach a rubber pipe to it then you can lift the shutter and clean the glass with air.

[Gift]

end user question here :rolleyes:

[mearmi]

I have made a special tool to clean the laser glass on these machines those swabs only push the dirt around.
Take a blower brush and attach a rubber pipe to it then you can lift the shutter and clean the glass with air.

Thanks a lot Allan. By cleaning the laser and replacing IDC sensors. Problem has gone.

[mearmi]

end user question here :rolleyes:

Thanks a lot for your help. BY replacing the IDC sensors. Problem has gone.

[Gift]

impressive...