PDA

View Full Version : Olivett MF250 / Bizhub C253


Custom Search


Itanic
07-23-2015, 02:32 PM
Hi guys. i'm a Ricoh engineer by trade. Had to look at an Olivetti MF 250 which i believe is a Bizhub C253. The yellow imaging unit drum surface is scratched badly. The part number for a C253 Yellow imaging unit is IU211Y? Will this fit the olivetti without any issues or is it slightly different in some way.
Apologies if there is a thread regarding this as i only had a quick look and usually only watch the Ricoh forum. Thanks in advance

Dickie
07-23-2015, 03:40 PM
Although physically they look the same the imaging unit chip is different.
You can fit the minolta unit but you would have to order a reset chip suitable for an olivetti and swap it over

Hope this helps

Custom Search